

Walkie Talkie Repeater Box RC 108 Two Way Relay Box Radio Intercom Repeater Box for K head Walkie-talkies
About this item
- LONG‑DISTANCE COMMUNICATION: In order to carry out long‑distance communication, we need handheld intercom repeater box to increase the communication distance by more than 10 kilometers, and is capable of two‑way communication (reception and transmission)
- SIMPLE OPERATION: No power supply is required, you do not need to replace any part of the walkie‑talkie, you only need two portable walkie‑talkies and connect the cable to the external mic/spk port (2.5mm and 3.5mm).
- TWO-WAY RECEPTION:The two-way plug of the handheld intercom relay box is not divided into input/output. The transmission mode of the relay box is two directions: machine a receives b and sends, machine b sends and receives a, realizing the two-way forwarding function.
- APPLICABLE TO MULTIPLE SCENARIOS: Handheld intercom relay box is suitable for connection between relay stations, and the signal extends the signal coverage area of the relay station. It is also suitable for cable erection site construction, underground mines, cave construction emergency rescue, etc
- PREMIUM MATERIAL AND EASY OPERATION: Made of high‑quality ABS material, which is durable and wear‑resistant, increase its service life. And the connection is convenient, only two two‑way handheld walkie‑talkies are connected to the handheld intercom repeater box through the earphone jack, which is convenient to use.
Product description
Lusiyik is committed to providing you with quality electronic products and their related peripherals. Thank you very much for choosing us! We will provide you with professional services and devote ourselves to creating a better daily life for the public, easily enhancing the sense of happiness and creating a warm and harmonious home. We hope we can become close friends. Specification: Item Type: Walkie‑Talkie Two Way Relay Box Material: ABS Colour: Black Connector: K Port is Used for Kenwood and Most Brand Walkie-talkies with the Same Connector Antenna/duplexer installation application: 1. Original multiplexer: Two hands connected to a repeater station, such as a peerless multiplexer, each hand must use two antennas separately! Both antennas must be lifted vertically! And between the two, they tried to distance themselves. At least not less than 5m / 16.4ft. (Two walkie‑talkie antennas prevent parallel erection!) 2. Duplexer: Purchase the corresponding frequency/power duplexer, couple the output ends of the two unit antennas at the "contact point" to the duplexer at the transmitting end and the receiving end respectively, and set the player reservation table of the corresponding frequency (one frequency must It is consistent with the duplexer). In the case of a duplexer, the repeater only needs to connect to an antenna! And there is no special attention when setting up the antenna! 3. We recommend using a duplexer, because there are no special requirements for the antenna when the duplexer repeats the station! As long as the height is sufficient. 4. It is recommended to use "Original for Kenwood" or "for Motorola" brand walkie‑talkies. Package List: 1 x Relay Box
Product details
You might also like



